This controller has never connected to Inteliverse, and has not been set to run offline.
| At a glance | |
|---|---|
| Code | 502 |
| Shown as | Cloud Setup Pending |
| Severity | Info |
| Category | 5xx — System / lifecycle |
| Clears | Automatically, on the first cloud connection |
A reminder to finish cloud setup, kept separate from device setup.
Keeps controlling normally.
Connect the controller to Inteliverse once — from the phone during setup, or Settings → Networking → Inteliverse.
An Offline-only mode is planned, which will clear this alarm on a controller that is meant never to connect. Current firmware has no way to turn it on, so an offline controller keeps showing this alarm. It is informational and does not affect control.