The NextStep dosing pump reports an overflow.
| At a glance | |
|---|---|
| Code | 333 |
| Shown as | Pump Overflow |
| In the alarm list | The device’s name, then Overflow — for example Acid Pump Overflow (upcoming firmware) |
| Severity | Severe |
| Category | 3xx — Process / sensor signals |
| Clears | Automatically, when the pump clears the condition |
The pump raised this condition itself; the controller reads it from the pump’s alarm register and shows it as an alarm. It is keyed to the pump, so the alarm names which pump raised it.
Records the alarm. The pump acts on its own alarms; the controller does not change the pump’s command because of it.