Components and ratings of the Intelifeeder Re-Pressurizer System.
Downloads: Data sheet (PDF) · Dimensional drawing (PDF)
¶ At a glance
| Part number | VGF100-1-35-55-C-L-115 |
| Pressure range | 0–80 PSI |
| Pumps | 1 |
| Pump output | 3.5 GPM |
| Tank capacity | 55 gallons |
| Level sensing | 2 dry contacts — LOW and LOW LOW |
| Alarm | Light |
| Input | 115 VAC, 60 Hz, single phase |
| Maximum current draw | 10 A per pump |
| Maximum temperature | 125 °F |
| Dry weight | 125 lb (1 pump) |
| Controller enclosure | IP65 |
¶ Dimensions
Inches. Footprint 23.5 × 20.7, 68.0 tall; four Ø 0.406 mounting holes on a 20.75 × 19.75 pattern.
¶ Stand
Welded, powder-coated carbon steel, with:
- tank support bands
- pump mounting plate
- piping anchors
- controller mount
¶ Tank
Medium-density rotationally molded polyethylene, 18" × 18" square and 42⅜" tall, with gallon and liter graduations.
| Capacity | 55 gallons |
| Level | Increment indicators on the tank; two spin welds for the LOW and LOW LOW level floats |
| Lid | 8" integral vented twist lid |
| Fill | 2" spin weld on the tank top, for a transfer pump |
| Suction | Bottom spin weld, for the pump |
¶ Pump
| Type | Rotary vane |
| Wetted materials | Brass |
| Output | 3.5 GPM |
| Relief valve | Integral, spring adjustable from 100–150 PSIG |
¶ Motor
| Power | ½ HP at 60 Hz |
| Voltage | 100–120 / 200–240 VAC |
| Speed | 1725 / 1425 RPM, clockwise rotation |
| Current | 7.1–7.2 / 3.4–3.6 A |
| Phase | Single |
| Protection | Thermally protected |
¶ Controller
| Enclosure | IP65 |
| Level inputs | Two contacting inputs — LOW and LOW LOW |
| Pressure transducer | Digital, 0–100 PSIG, ±1 % of total span, silicone piezo-resistive strain gauge |
| Outputs | Relay 1 — feed pump. Relay 2 — alarm light, hard-wired. |
| Controls | One button — HOA and wireless mode |
| Indicator | One status light — see Status light |
| Connectivity | On-board WiFi, and Wi-Fi Direct for local setup |
¶ Piping
| Pressure gauge | Digital, 0–100 PSIG |
| Pressure relief valve | 80 PSIG fixed (adjustable on some models) |
| Pump connection | Union |
| Suction | Ball valve |
| Transducer | Tee |
| Discharge | ¾" FNPT |
| Also on the pump line | Check valve, Y-strainer, shut-off valve, drain valve |
¶ Accessories
| Part number | Description |
|---|---|
| Modem-Connect | Wi-Fi modem package — cellular connectivity for the controller |
| GF-55-PMP-Kit | Transfer pump package for the 55-gallon tank |
¶ Power
| Supply | 115 VAC single phase, GFCI-protected outlet |
| Circuit | Dedicated, 15 A breaker |
| Protection | On-board breaker |
¶ Manufacturer
Vector Industries, Inc. — 531 W Newhall Ave, Waukesha, WI 53186 · (262) 542-4550 · sales@vector-industries.com · vector-industries.com