Day-to-day use of a running InteliHive: reading and acknowledging alarms, running outputs by hand, calibrating probes, setting alarm limits, keeping it connected, and keeping its firmware current.
The controller has a round display and four buttons: Up and Down move through lists, Enter selects, Back goes back. The home screen shows each control mode as a tile — its reading, what its output is doing, and a padlock when an interlock is holding it.
| To… | Go to |
|---|---|
| See what is wrong | Alarms |
| Run a pump or valve by hand, or hold it off | Hand, Off, Auto |
| Calibrate a conductivity probe | Calibration |
| Set alarm limits on a reading | Reading Limits |
| Connect to WiFi or Inteliverse | Network and Cloud |
| Update the firmware | Firmware Updates |
| Find a setting | Settings |